Step 3: Mix epoxy in 1/1 ratio, pour a thin layer of the mixture on the wood inlay, let cure for ate least 12 hours. Once the epoxy is fully cured proceed to grind it using belts trizact and No.09, then polish it with a soft cloth wheel using greystar, buff it up with green paste or redrush, i.d. touch. PROTIP: While grinding or polishing, don't let the epoxy get too hot, you can avoid this by dipping it in water.
Beveled edge Tungsten band, all high polish with a 4mm blood wood inlay. Select width and size then add to cart.